Click image to view full size image
Name |
PLA Sheet |
Product Category |
Modified PLA sheet for blister product |
Feature |
Excellent tenacity and workability. Surface resistivity is 1011Ω |
Degradable rate |
Fully biodegradable after 6months under composting condition |
Color/printing |
Natural/White/Black |
Thickness |
0.3-1.2mm per customer’s order |
Sample |
Available, sample lead time within 5 days after receive the artwork from customer |
MOQ |
20,000 pieces |
Lead time |
Commonly within 5-10 days after receiving down payment and it depends on your order quantity. |
Application |
Blister production material. |
Shipment port |
Shenzhen |
Payment terms |
T/T , L/C,western union |
Conventional terms of payment |
50% deposit and full payment of copper plate,50% balance payment before shipment |
Advantage |
FDA-approved, food grade material |
Note: | |
1. Quotation offer: Please advise material, thickness, size, printing color, quantity and any other requirements you prefer. | |
2. Customized service: We accept OEM order, in fact, every design are unique, we welcome your enquiry any time! | |
3. Declaimer: The pictures relevant to these products are provided for reference only. We do not have any intellectual property rights over the trademarks displayed, and we would not sell any products contain these trademarks. | |
Product property：
Typical Material & Application Properties | |||
Film Properties |
BD5101 /BD5102 /BD5103 |
Method |
|
Density |
1.23-1.30 g/cm3 |
ASTM D1505 |
|
Tensile Properties | |||
Tensile Strength |
MD |
35-40 MPa |
ASTM D882 |
Elongation at break |
MD |
70-120 % |
ASTM D882 |
Flexural Strength |
90-100 MPa |
ASTM D790 |
|
Thermal Characteristics | |||
Heat Distortion Temp. |
50-55 ℃ |
ASTM D648 |
|
Melting Point |
155-170 ℃ |
ASTM D3418 |
|
Electrical Properties | |||
Surface resistivity |
1011 ohms/sq |
ASTM D257 |
|
Impact Strength | |||
IZOD notched |
NB |
ASTM D256 |
|
degradation cycle |
6 months |
EN 13432 |
|
E-mail: 